Canon 50 - Manual (Page 79)

79
Advance
d
Fun
c
tio
ns
Chan
ging t
he Set
tings (2)
E
 About the audio level indicator:
When [MIC LEVEL] is set to [AUTO], the audio level indicator switches on and
off with each press of the AUDIO LEVEL button.
 The audio level can be changed when the green bar is displayed. We
recommend hiding the bar when you have finished adjusting to prevent
accidental changes.
 The microphone level resets to [AUTO] when you switch the mode dial to .
 When the data code is being displayed, the level indicator will not display.
 We recommend using headphones when manually adjusting the audio level, or
using the microphone attenuator.
 When sound is distorted even though the audio level indicator shows an
appropriate level:
Activate the microphone attenuator by setting [MIC ATT] to [ON]. The
microphone attenuator can also be used in CARD CAMERA mode.
Adjusting the Headphone Volume
The headphones terminal also serves as AV terminal. Headphones can only be used
when “
” is displayed on the screen. If not, change the setting ( 42).
Press the MENU button and select [AUDIO SETUP]. Select [ VOLUME],
adjust the volume with the SET dial and press the MENU button.
CAMERA PLAY (VCR) CARD CAMERA CARD PLAY
MENU
(
71)
AUDIO SETUP VOLUME•••••
12 -dB40 0
M Level indicator
Guide (green bar)