FXpansion BFD Eco - Manual (Page 15)

15
Setting the Snare channel output
Output selector
The Output selector at the bottom of each channel allows you to route its signal to the kit-piece’s
direct output, to the Aux1 and Aux2 channels, or to the Master channel which is hard-wired to the first
stereo output from the plugin.
Note that the signal flow between channels is always from left to right – you cannot route any channel
to a channel on its left.
By default, all channels are routed to the Master channel.
In the standalone version, all direct output routings are automatically changed to the Master channel,
as the application has a stereo output.
4:4 Channel context menu
Right-clicking (or CTRL-clicking on Mac) on a channel in the mixer displays the channel context menu.
Load Kit-piece
Opens the kit-piece browser.
You can also double-click a kit-piece channel image to display the kit-piece browser.
Clear Kit-piece
Removes the currently loaded kit-piece from the channel. The channel’s additional settings remain unchanged.
Copy Channel
Paste Channel
These functions allow you to copy and paste the contents of a channel. All the channel’s controls, with the exception of
Mute/Solo buttons, are copied/pasted – this includes the Level, Pan and all controls in the Channel page inspector, EQ
and FX slots.
Reset Channel
Resets all channel controls to their default settings, except the EQ, FX slots and Aux Sends, which are all unaffected.
Clear Channel FX
Removes any FX devices loaded into the channel’s FX slots, and resets the EQ to default settings.
Clear Aux Sends
The values of the Aux1 / Aux2 Send parameters for the channel are reduced to 0.