10 descaling, 9 cleaning – Gaggia GAGGIA User Manual

Page 21

Advertising
background image

• 21 •

English

10 DESCALING

Limescale normally builds up with the use of the appliance.
The machine needs descaling every 1-2 months (if used) and/
or whenever a reduction in water fl ow is noticed. Use the GAG-
GIA descaling solution only.

In case of confl ict, priority must be given to
what is indicated in the operation and mainte-

nance manual over the instructions provided on sepa-
rately sold accessories and materials.

Use the GAGGIA descaling
solution only. Its formula

has been designed to ensure bet-
ter machine performance and
operation for its whole operat-
ing life. If correctly used, it also
avoids alterations in the brewed
product. The descaling solution
is to be disposed of according to
the manufacturer’s instructions
and/or regulations in force in the
country of use.

Never drink the descaling solution or any prod-
ucts dispensed until the cycle has been carried

out to the end. Never use vinegar as a descaling solu-
tion.

1 (Fig.15-16)

-

Insert the fi lter holder (without coff ee) into

the brew unit (8) from the bottom and turn it from left to
right until it locks into place.

2 (Fig.1)

-

Remove and empty the water tank.

3 (Fig.2)

-

Pour the ENTIRE content of the GAGGIA concen-

trated descaling solution into the water tank, then fi ll the
tank with fresh drinking water up to the MAX level.

4 Remove the Pannarello (or Cappuccinatore) installed on

the steam wand, if any.

5 Turn on the machine by pressing the ON/OFF button (16).

The indicator light (17) turns on.

Fill up (as described in the “HOT WATER” section of the
manual) 2 cups of water (about 150  ml each) from the
steam / hot water wand and turn off the machine by press-
ing the ON/OFF button (16); the indicator light (17) turns
off .

6 Let the descaling solution take eff ect for approx.15-20

minutes with the machine turned off .

9 CLEANING

Maintenance and cleaning can only be carried out when the
machine is cold and disconnected from the electric network.
• Do not immerse the machine in water or place any of its

parts in a dishwasher.

• Do not use spirit, solvents and/or aggressive chemical

agents.

• We recommend cleaning the water tank and refi lling it

with fresh water daily.

(Fig.31-33) - Every day, after heating milk, remove the

external part of the Pannarello and wash it with fresh
drinking water.

(Fig.31-32-33) - Clean the steam wand weekly. In order

to do this, perform the following operations:

- Remove the external part of the Pannarello (for standard

cleaning);

- Remove the upper part of the Pannarello from the steam

wand;

- Wash the upper part of the Pannarello with fresh drinking

water;

- Wash the steam wand with a wet cloth and remove any

milk residue;

- Reposition the upper part in the steam wand (make sure

it is completely inserted);

- Reassemble the external part of the Pannarello.

(Fig.34) - Empty and clean the drip tray every day.
• Use a soft, dampened cloth to clean the appliance.
(Fig.21) - Perform the following operations to clean the

pressurized fi lter holder:

- (Fig.11) - Remove the fi lter and wash it thoroughly with

hot water.

- Remove the adapter (if fi tted), and wash it thoroughly

with hot water.

- Wash the internal part of the pressurized fi lter holder.

• Do not dry the machine and/or its parts using a microwave

and/or standard oven.

Advertising