Canopy 40 – Giga Tent GT 004W User Manual

Page 3

Advertising
background image

Approx.

48”

Canopy

40

Stake placement

Step 3- EXTRA STABILITY in WINDY CONDITIONS (see above)

Step 4- TAKING the CANOPY DOWN

F

11)

(FIGURE F)

In windy conditions use the nail stakes and guylines to add extra stability

.

Warning

The canopy is very susceptible to damage from high winds and every precaution

should be taken to prevent damage to the canopy and frame. This is extremely
important when the canopy is being used on a hard surface such as a driveway or
concrete. Weights such as sand bags or bricks can be used in place of stakes.

In very heavy torrential rain care must be taken to insure that water does not collect

on the canopy top as this added weight will cause damage to the frame. The canopy
should NOT be left without first detaching the canopy from the frame and allowing it
to fall INSIDE the frame to reduce the risk of collecting rain water, or the canopy can

be taken down.

Warning

The canopy top should be removed from the frame to prevent the frame from damaging

the material.

1)
2)
3)

4)

5)
6)

Pull up all of the stakes.
Undo all of the Velcro tabs holding the canopy top to the frame.
Lower the legs to the lowest height by pushing in on the locking button located at the top of

the lower leg.

Unlock the lower hub on all of the legs by pushing in on the locking button located on the

inside of the hub and partially collapse the frame.

Remove the canopy top to prevent damage from the frame.
Fully collapse the frame.

Advertising
This manual is related to the following products: