Hazard warning flashers, Turn and lane-change signals, Hazard warning flashers on – GMC 2012 Acadia User Manual

Page 176: Hazard warning flashers -4 turn and lane-change, Signals -4

Advertising
background image

Black plate (4,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

6-4

Lighting

Hazard Warning Flashers

|

Hazard Warning Flasher:

Press this button located on the
instrument panel below the audio
system, to make the front and rear
turn signal lamps flash on and off.
This warns others that you are
having trouble. Press again to turn
the flashers off.

The turn signals do not work while
the hazard warning flashers are on.

Turn and Lane-Change
Signals

An arrow on the instrument panel
cluster flashes in the direction of the
turn or lane change.

Move the lever all the way up or
down to signal a turn.

Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is completed. If the lever is
briefly pressed and released, the
turn signal flashes three times.

The lever returns to its starting
position whenever it is released.

If after signaling a turn or lane
change the arrow flashes rapidly or
does not come on, a signal bulb
might be burned out.

Have the bulbs replaced. If the bulb
is not burned out, check the fuse.
See Fuses and Circuit Breakers on
page 10‑30
.

Turn Signal On Chime

If either one of the turn signals is left
on and the vehicle has been driven
more than 1.2 km (0.75 mi), a chime
will sound.

Advertising