Immobilizer, Immobilizer operation, Immobilizer -14 immobilizer operation -14 – GMC 2012 Acadia User Manual

Page 44: 14 keys, doors, and windows

Advertising
background image

Black plate (14,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

2-14

Keys, Doors, and Windows

If the key is not placed in the
ignition and turned to START
or the door is not unlocked by
pressing

Q

during the 10-second

pre-alarm, the alarm goes off. The
headlamps flash and the horn
sounds for about 30 seconds, then
turns off to save the battery power.

The vehicle can be started with the
correct ignition key if the alarm has
been set off.

To avoid setting off the alarm by
accident:

.

Lock the vehicle with the door
key after the doors are closed.

.

Unlock the door with the RKE
transmitter. Unlocking a door any
other way sets off the alarm if
the system has been armed.

Press

K

or place the key in the

ignition and turn it to START to turn
off the alarm.

Testing the Alarm

To test the alarm:

1. From inside the vehicle, lower

the driver side window, and open
the driver door.

2. Press

Q

.

3. Get out of the vehicle, close the

door, and wait for the security
light to go out.

4. Reach in through the window,

unlock the door with the manual
door lock, and open the door.
This should set off the alarm.

If the alarm does not sound when it
should, but the headlamps flash,
check to see if the horn works. The
horn fuse may be blown. To replace
the fuse, see Fuses and Circuit
Breakers on page 10‑30
.

If the alarm does not sound or the
headlamps do not flash, see your
dealer for service.

Immobilizer

See Radio Frequency Statement on
page 13‑20
for information
regarding Part 15 of the Federal
Communications Commission (FCC)
rules and Industry Canada
Standards RSS-GEN/210/220/310.

Immobilizer Operation

This vehicle has PASS-Key

®

III+

(Personalized Automotive Security
System) theft-deterrent system.
PASS-Key III+ is a passive
theft-deterrent system.

The system is automatically armed
when the key is removed from the
ignition.

The system is automatically
disarmed when the key is turned to
ON/RUN, ACC/ACCESSORY,
or START from the LOCK/OFF
position.

You do not have to manually arm or
disarm the system.

Advertising