Grant Instruments XUB Series - Manual (Page 23)

XUB Series 29666 V1
Operating Manual
21
EN
Recording and downloading the data
System Requirements:
- Windows 2000 SP4; XP SP2
- Mac OS 10.1.2+
- USB High Speed Hub Port (500mA)
- One available USB port
To record the saved data:
Always ensure the SD card is inserted into the Grant digital ultrasonic bath prior to
turning the power on.
The SD card will save the cycle results of each cycle until the card is removed.
Once you are ready to download the information, remove the SD card. Insert it into the
SD card reader provided and plug the card reader into a the USB port of the PC..
There is a file on the SD card which is already set up to provide a template for
recording the data – Grant.xls. Open this file and the data will display in spreadsheet
format.
The file will show information of every cycle run while the SD card has been in place in
the Grant digital ultrasonic bath.
To ensure that the next cycle information is recorded on the SD card, switch off the
Grant digital ultrasonic bath and reinsert the card before switching the bath on again.
The data will only be saved to the card, if it is inserted before the machine is switched
on. If the SD card is inserted when the Grant digital ultrasonic bath is already switched
on, the data will not be recorded.