Heli-Max HMXE13 Manual - Manual (Page 11)

11
TURNING THE MODEL ON TURNING THE MODEL ON
❏
Place the helicopter on its side and slide the battery into the battery compartment.
Connect the fl ight battery and place the helicopter onto a fl at surface.
❏
Turn the transmitter on and allow the helicopter to remain still for 10 seconds.
Always step 15 feet [4.5m] away from the AXE CXn Helicopter before operating
the throttle.
Your AXE CXn helicopter has a safe start feature built in that prevents
the motor from activating unless the collective stick has been lowered
to the lowest position. If the motor won’t run and turn the main blades,
please make sure the collective stick is all the way down and leave it
there for a couple of seconds. Then try moving the stick up slowly.