Heli-Max HMXE13 Manual - Manual (Page 5)

5
Keep these items away from the rotors: loose clothing, shirt sleeves, ties, scarfs,
long hair or loose objects such as pencils or screwdrivers that may fall out of
shirt or jacket pockets into the rotors.
The spinning blades of a model helicopter can cause serious injury. When choosing
a fl ying site for your AXE CXn, stay clear of buildings, trees and power lines.
AVOID fl ying in or near crowded areas. DO NOT fl y close to people, children or
pets. Maintain a safe pilot-to-helicopter distance while fl ying.
Your AXE CXn should not be considered a toy, but rather a sophisticated,
working model that functions very much like a full-size helicopter. Because of its
performance capabilities, the AXE CXn, if not operated correctly, could possibly
cause injury to yourself or spectators and damage to property.
Do not alter or modify the model, as doing so may result in an unsafe or unfl yable
model. In a few cases the instructions may differ slightly from the photos. In those
instances the written instructions should be considered as correct.
You must check the operation of the model before every fl ight to insure that all
equipment is operating and that the model has remained structurally sound. Be
sure to check linkages or other connectors often and replace them if they show
any signs of wear or fatigue.
ADDITIONAL ITEMS REQUIRED ADDITIONAL ITEMS REQUIRED
❏ (4) AA Alkaline cells (FUGP7300)
KIT INSPECTION KIT INSPECTION
Before starting assembly, take an inventory of the AXE CXn to make sure it is
complete, and inspect the parts to make sure they are of acceptable quality. If
any parts are missing or are not of acceptable quality, or if you need assistance
with assembly, contact Product Support. When reporting defective or missing
parts, use the part names exactly as they are written in the
Kit Contents list.
Heli-Max Product Support Ph: (217) 398-8970, ext. 5
3002 N. Apollo Drive, Suite 1 Fax: (217) 398-7721
Champaign, IL 61822 E-mail: [email protected]