Heli-Max HMXE13 Manual - Manual (Page 18)

18
MAINTENANCE AND REPAIR MAINTENANCE AND REPAIR
The Heli-Max ® AXE CXn is an extremely small helicopter. Working on a model
this size will require small tools. The DTXR0170 DuraTrax ® Precision Phillips
Screwdriver 00x75mm is recommended. On occasion it will be necessary to
replace damaged parts after a crash. Please use this section as a guide to
perform repairs.
Main Rotor Blade Replacement
Remove the blade bolt using a #00 phillips screwdriver. After the blade bolt has
been removed, slide the rotor blade out of the blade grip. Reinstall the new blade,
ensuring that the holes within the blade and blade grip are aligned properly.
Reinstall the blade bolt.
Main Rotor Grip Replacement
Remove both blade bolts and main rotor blades. Remove the two grip bolts and
remove the blade grips. Place the new grips onto the pins. Install the grip bolts
and install the blades.