Heli-Max HMXE0806 - Manual (Page 24)

24
Replacing the Main Gear
Remove the lower retaining pin from the main gear using needle nose pliers.
Remove the old main gear from the model and install the new main gear. Align
the hole in the main shaft with the hole in the main gear and press the small pin
back through the hole.
Replacing the Main Shaft
Remove the lower retaining pin from the main gear using needle nose pliers.
Disconnect the servo linkages from the swashplate. Slide the main shaft straight
up and out of the main frame. Remove and transfer necessary parts to the new
main shaft and reinstall by reversing the order listed above.