Heli-Max HMXE0806 - Manual (Page 30)

30
Swashplate Type
Three swashplate types are available with the TX6024 transmitter. The Novus
125 CP uses the 120° CCPM EPA type. The TX6024 also has a single servo
(pure function) swashplate type and a 120° CCPM PAE swashplate type.
Channel Reversing
The channel reversing function is used to reverse the operation of a servo.
Select the channel you want to reverse and press the [L] or [R] key and the
direction indication on the screen will change. To set this value you must press
the [ENTER] key before exiting this function.
Aux Channel
The AUX channel can be enabled or disabled by selecting the [ON] or [OFF]
respectively.
Buzzer Setting
Set to [OFF] to disable the internal speaker. Set to [ON] to enable the internal
speaker.
Exponential and Throttle Curve
To enable this function the press [L] button until “ON” is shown on the display.
This function is disabled by default. Set both adjusters to the mid point or 50%.
Adjuster V1 is used to set the throttle curve hover point percentage and Adjuster
V2 is used to set the control exponential. Both values will be set when the
[ENTER] key is pressed. The throttle curve hover point is also adjustable for the
normal fl ight mode and for fl ight mode 1. The value stored depends on where
the fl ight mode switch is set when the [ENTER] key is pressed.
1 Servo – Pure Function 120º CCPM EPA Mixing
Novus 125 CP
120º CCPM PAE Mixing