HONDA 2014 Crosstour - Owner's Manual - Manual (Page 491)

490
uu Replacing Light Bulbs u Brake/Taillights, Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
Main
tenan
ce
2. Turn the socket to the left and remove it.
3. Push in the old bulb, rotate to the left until
it unlocks, and remove.
4. Insert new bulb.
Brake/Taillights, Back-Up Light, Rear Turn Signal
Light and Rear Side Marker Light Bulbs
When replacing, use the following bulbs.
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove the covers.
u Wrap the flat-tip screwdriver with a cloth
to prevent scratches.
Bulb
Socket
Brake/Taillight: 21/5 W
Back-Up Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Maker Light: 3 CP
Cover
14 CROSSTOUR-31TP66400.book 490 ページ ２０１３年１０月４日 金曜日 午後２時３２分