HONDA 2014 Crosstour - Owner's Manual - Manual (Page 530)

Continued 529
uu Jump Starting u
Han
d
lin
g the U
n
expected
4. Connect the other end of the second
jumper cable to the engine mounting bolt
(4-cylinder models)/engine hanger
(6-cylinder models) as shown.
Do not connect this jumper cable to any
other part.
5. If your vehicle is connected to another
vehicle, start the assisting vehicle’s engine
and increase its rpm slightly.
6. Attempt to start your vehicle’s engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
1 Jump Starting
Battery performance degrades in cold conditions and
may prevent the engine from starting.
4-cylinder models
6-cylinder models
14 CROSSTOUR-31TP66400.book 529 ページ ２０１３年１０月４日 金曜日 午後２時３２分