HONDA 2014 Crosstour - Owner's Manual - Manual (Page 79)

78
uu Indicators u
In
strum
e
nt Pa
nel
Indicator Name On/Blinking Explanation
Smart Entry
System Indicator
*
● Comes on for a few seconds when you
change the power mode to ON, then goes
off.
● Comes on as soon as a problem is detected
in the smart entry system or push button
starting system.
● Have your vehicle checked by a dealer.
Starter System
Indicator
*
● Comes on for a few seconds when you set
the power mode to ON, then goes off.
● Comes on if the starter system has a
problem.
● As a temporary measure, press and hold the ENGINE
START/STOP button for 15 seconds while pressing
the brake pedal and manually start the engine. Have
the vehicle checked by a dealer.
Turn Signal and
Hazard Warning
Indicators
● The turn signal indicators blink when you
operate the turn signal lever.
● If you press the hazard warning button, both
indicators and all turn signals blink at the
same time.
● Does not blink or blinks rapidly - A turn signal
light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 489, 490
U.S.
Canada
* Not available on all models
14 CROSSTOUR-31TP66400.book 78 ページ ２０１３年１０月４日 金曜日 午後２時３２分