HONDA 2014 Crosstour - Owner's Manual - Manual (Page 531)

530
uu Jump Starting u
Han
d
lin
g the U
n
expected
Once your vehicle’s engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle’s ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle’s battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
■ What to Do After the Engine Starts
14 CROSSTOUR-31TP66400.book 530 ページ ２０１３年１０月４日 金曜日 午後２時３２分