HONDA 2014 Crosstour - Owner's Manual - Manual (Page 519)

uu If a Tire Goes Flat u Changing a Flat Tire
518
Han
d
lin
g the U
n
expected
1. Push the rear edge of the handle on the
front cargo floor lid and open the lid.
2. Remove the hook from the back of the
cargo floor lid.
Pull the hook to the hole on the side
panel.
3. Take out the removable box.
2 Under-floor Storage Area P. 150
4. Take the jack, extension bar, and wheel
nut wrench out of the tool case.
■ Getting Ready to Replace the Flat Tire 1 Changing a Flat Tire
NOTICE
Do not use the jack if it doesn’t work properly. Call
your dealer or a professional towing service. Handle
Tool Case
14 CROSSTOUR-31TP66400.book 518 ページ ２０１３年１０月４日 金曜日 午後２時３２分