HONDA 2014 CR-V - Owner's Manual - Manual (Page 292)

291
uu Replacing Light Bulbs u Side Marker Light Bulb
Main
tenan
ce
2. Push the tab to remove the coupler.
3. Rotate the old bulb to the left to remove.
4. Insert new bulb.
Side Marker Light Bulb
When replacing, use the following bulbs.
1. Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Bulb
Coupler Tab
Side Marker Light: 3CP
1 Fog Light Bulbs *
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Insert the clip with the central pin raised, and push
until it is flat.
Central pin
Push until the
pin is flat.
Bulb Socket
* Not available on all models
14 CR-V-31T0A6200.book 291 ページ ２０１４年２月１０日 月曜日 午後７時１分