HONDA 2014 CR-V - Owner's Manual - Manual (Page 298)

297
uu Checking and Maintaining Wiper Blades u Changing the Front Wiper Blade Rubber
Main
tenan
ce
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
u Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
Blade
Top Retainer
Blade
Tab
Indent
14 CR-V-31T0A6200.book 297 ページ ２０１４年２月１０日 月曜日 午後７時１分