HONDA 2014 CR-V - Owner's Manual User Manual
Page 70
69
uu
Indicators
u
Continued
In
strum
e
nt Pa
nel
Indicator
Name
On/Blinking
Explanation
Malfunction
Indicator Lamp
●
Comes on when you turn the ignition switch
to ON
(
w
, and goes off when the engine
starts, or after several seconds if the engine
did not start. If “readiness codes” have not
been set, it blinks five times before it goes off.
●
Comes on if there is a problem with the
emissions control systems.
●
Blinks when a misfire in the engine's cylinders
is detected.
●
Readiness codes are part of the on board diagnostics
for the emissions control systems.
2 Testing of Readiness Codes P. 349
●
Comes on while driving - Have your vehicle
checked by a dealer.
●
Blinks while driving - Stop in a safe place where
there are no flammable objects. Stop the engine for
10 minutes or more, and wait for it to cool down.
Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp Comes On or
Charging System
Indicator
●
Comes on when you turn the ignition switch
to ON
(
w
, and goes off when the engine
starts.
●
Comes on when the battery is not charging.
●
Comes on while driving - Turn off the heating and
cooling system
*
/climate control system
*
and rear
defogger to reduce electricity consumption.
2 If the Charging System Indicator Comes On
P. 333
Shift Lever
Position Indicator
●
Indicates current the shift lever position.
(
d
indicator:
●
Comes on for a few seconds when you turn
the ignition switch to ON
(
w
, then goes off.
●
Comes on when you press the
(
d
button
while the shift lever is in
(
D
.
* Not available on all models
14 CR-V-31T0A6200.book 69 ページ ２０１４年２月１０日 月曜日 午後７時１分