Vents, heating, and a/c – HONDA 2007 Element - Owner's Manual User Manual

Page 106

Advertising
background image

The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.

The system should be left in fresh
air mode under almost all conditions.
Keeping the system in recirculation
mode, particularly with the A/C off,
can cause the windows to fog up.

Switch to recirculation mode when
driving through dusty or smoky
conditions, then return to fresh air
mode.

Use the mode control dial to select
the vents the air flows from. Some
air will flow from the dashboard
vents in all modes.

Turning this dial clockwise increases
the temperature of the airflow.

Turn this dial clockwise to increase
the fan speed and airflow.

This button turns the air
conditioning on and off. The
indicator in the button is on when
the A/C is on.

When the recirculation indicator is
on, air from the vehicle’s interior is
sent throughout the system again.
When the indicator is off, air is
brought in from the outside of the
vehicle (fresh air mode).

The system automatically
turns on the A/C and

switches to recirculation mode. Air
flows from the center and side vents
in the dashboard.

Air flows from the center

and corner vents in the dashboard.

Airflow is divided between

the vents in the dashboard and the
floor vents.

Air flows from the floor

vents. When you select , the
system automatically switches to
fresh air mode.

Airflow is divided between

the floor vents and the defroster
vents at the base of the windshield.

This button turns the rear window
defogger on and off (see page

).

73

CONTINUED

Rear Window Def ogger Button

Mode Control Dial

Air Conditioning (A/C) Button

Temperature Control Dial

Fan Control Dial

Air Flow Controls

Recirculation Button

Vents, Heating, and A/C

Fe
a

tu

re

s

103

Main Menu

Table of Contents

Advertising