HONDA 2007 Element - Owner's Manual - Manual (Page 208)

The floor mats that came with your
vehicle hook over the floor mat
anchors. This keeps them from
sliding forward and possibly
interfering with vehicle operation.
If you remove the driver’s floor mat,
make sure to re-anchor it when you
put it back in your vehicle.
If your seat belts get dirty, use a soft
brush with a mixture of mild soap
and warm water to clean them. Do
not use bleach, dye, or cleaning
solvents. Let the belts air-dry before
you use the vehicle.
Dirt build-up in the loops of the seat
belt anchors can cause the belts to
retract slowly. Wipe the insides of
the loops with a clean cloth
dampened in mild soap and warm
water or isopropyl alcohol.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Press the brake pedal to make
sure the new bulb is working.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Put the cover back onto the light
assembly. Push it on until it locks
in place. 3.
4.
5.
6.
CONTINUED
If equipped
Cleaning the Seat Belts Floor Mats
Cleaning the Seat Belts, Floor Mats
Ma
int
e
na
nce
205
LOOP
BULB SOCKET
Main Menu Table of Contents