HONDA 2007 Element - Owner's Manual - Manual (Page 207)

Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Turn on the parking lights and
check that the new bulb is
working.
Put the lens back into the light
assembly, right side first. Push on
the left edge until it snaps into
place.
Using a cloth to prevent scratches,
insert a small flat-tip screwdriver
between the left edge of the lens
and the housing. The lens will
come down.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
1.
2.
3.
4.
1.
2.
Lights
Replacing a High-mount Brake
Light Bulb Replacing a Rear License Plate
Bulb
204
COVER TAB TAB
BULB
LENS
SCREWDRIVER
HOUSING
LENS
CLOTH
Main Menu Table of Contents