HONDA 2007 Element - Owner's Manual - Manual (Page 205)

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
The front side marker light is next
to the headlight bulb. On the
driver’s side, remove the front end
of the air intake duct by pulling it
out (see page
).
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Turn on the lights to make sure
the new bulb is working.
Put the light assembly back into
the body, bottom first. Push on the
top edge until it snaps into place.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Test the lights to make sure the
new bulb is working.
Install the front end of the air
intake duct.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
1.
3.
2.
4.
5.
6.
4.
5.
6.
199
On SC model
Lights
202
Main Menu Table of Contents