HONDA 2005 CR-V - Owner's Manual - Manual (Page 210)

Open the tailgate. Remove the
light assembly cover by pushing in
on the tabs on both sides and
pulling the cover off.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Press the brake pedal to make
sure the new bulb is working.
Put the cover back on the light
assembly. Push it in until it locks
in place.
1.
2.
3.
4.
5.
6.
Lights
Replacing a High-mount Brake
Light Bulb
Ma
int
e
na
nce
207
COVER BULB
Main Menu Table of Contents