Installing a child seat – HONDA 2005 CR-V - Owner's Manual User Manual
Page 45
![background image](/manuals/678905/45/background.png)
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Attach the tether strap hook to the
tether anchor in the ceiling, then
tighten the strap as instructed by
the child seat maker.
Remove the head restraint (see
page
). Make sure the removed
head restraint is secured in the
cargo area. Reinstall the head
restraint when the child seat is
removed.
Route the tether strap over the
seat-back, making sure the strap is
not twisted.
Locate the appropriate anchor
cover, and pull it down and out to
expose the tether anchor.
5.
4.
6.
7.
8.
9.
Installing a Child Seat
42
TETHER STRAP HOOK
Flexible type
ANCHOR
Main Menu
Table of Contents