HONDA 2005 CR-V - Owner's Manual - Manual (Page 48)

A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat (see page
), remove the
head restraint, then route the
tether strap over the seat-back.
Make sure to store the removed
head restraint in the cargo area
and to reinstall it when the child
seat is removed.
Remove the cover with a small
flat-tipped screwdriver or
fingernail file.
Attach the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
3.
2.
43
4.
CONTINUED
Installing a Child Seat with a
Tether
Installing a Child Seat
Using an Outer Anchor
Dr
iv
er
and
P
asseng
er
Saf
e
ty
45
TETHER ANCHORAGE POINTS
COVER
TETHER STRAP HOOK
ANCHOR
Main Menu Table of Contents