Seats – HONDA 2005 CR-V - Owner's Manual User Manual
Page 87
Pull out the fastening strap from
the slit on the seat-back. Move the
front seat forward slightly, then
attach the anchor on the fastening
strap to the hook on the bottom of
the front seat. Adjust the front
seat to the desired position.
Reverse this procedure to return the
seat to the upright position.
Make sure the seat is securely
latched before driving.
When you are not using the
fastening strap, roll up the strap and
store it properly into the slit on the
seat-back.
Make sure all rear shoulder belts are
positioned in front of the rear seat-
backs.
In the center seating position of the
rear seat, be sure the detachable
anchor is latched securely before
using the seat belt (see page
).
Make sure all items in the cargo area
are secured. Loose items can fly
forward and cause injury if you have
to brake hard (See
on page
).
Pull the fastening strap tab toward
the slit to tighten the strap, and
make sure the seat is secure.
Make sure that the folded up rear
seat does not interfere with the front
passenger’s seat-back. This will
cause the front passenger’s weight
sensors to work improperly (see
page
). Also check the passenger
airbag off indicator to assure proper
operation of the passenger’s
advanced front airbag.
5.
6.
Seats
Carrying Cargo
84
HOOK
FASTENING
STRAP
HOOK
ANCHOR
Main Menu
Table of Contents