Service station procedure – HONDA 2004 S2000 - Owner's Manual User Manual

Page 105

Advertising
background image

Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.

Lift it up slightly to remove the
support rod from the hole. Put the
support rod back into its holding clip.
Lower the hood to about a foot (30
cm) above the fender, then let it
drop. Make sure it is securely
latched.

Put your fingers under the front
edge of the hood to the right of
center. Slide your hand to the left
until you feel the hood latch
handle. Push this handle to the left
until it releases the hood. Lift the

hood.

If the hood latch handle moves
stiffly, or if you can open the hood
without lifting the handle, the
mechanism should be cleaned and
lubricated.

Pull the support rod out of its clip
and insert the end into the hole on
the front of the hood around the
center.

1.

2.

3.

Service Station Procedure

Opening the Hood

To Close the Hood

Bef ore Driving

102

RELEASE HANDLE

Main Menu

Table of Contents

Advertising