HONDA 2004 S2000 - Owner's Manual - Manual (Page 159)

Remove the three clips holding
the spare tire cover by pulling
straight up on the rings. Remove
the spare tire cover. Unscrew the wing bolt, and take
the spare tire out of the spare tire
shelf.
Loosen the five wheel nuts 1/2
turn with the wheel wrench.
Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
center of the jacking point tab is
resting in the jack notch. 4. 5.
6.
7.
Changing a Flat Tire
Taking Care of the Unexpected 156
SPARE TIRE COVER
Main Menu Table of Contents