HONDA 2004 S2000 - Owner's Manual - Manual (Page 56)

The ignition switch has three
positions: LOCK (0), ACCESSORY
(I), and ON (II).
You can insert or
remove the key only in this position.
To turn the key, you must push the
key in slightly. If the front wheels
are turned, the anti-theft lock may
make it difficult to turn the key.
Firmly turn the steering wheel to the
left or right as you turn the key.
This is the normal key
position when driving. Several of the
indicators on the instrument panel
come on as a test when you turn the
ignition switch from ACCESSORY
(I) to ON (II).
The engine can be started with the
key in this position by pressing the
engine START button (see page
).
You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or
ACCESSORY (I) position and open
the driver’s door. Remove the key to
turn off the beeper.
You can
operate the audio system and the
accessory power socket in this
position.
113
Ignition Switch
Instruments and Controls
LOCK (0)
ON (II)
ACCESSORY (I)
53
Removing the key from the
ignition switch while driving
locks the steering. This can
cause you to lose control.
Remove the key from the
ignition switch only when
parked.
Main Menu Table of Contents