Automatic transmission – HONDA 2002 CR-V - Owner's Manual User Manual
Page 213
This allows you to move the shift
lever out of Park if the normal
method of pushing on the brake
pedal does not work. This procedure
is also used to release the Reverse
Lockout.
Put a cloth on the edge of the Shift
Lock Release slot cover next to
the shift lever.
Use a small flat-tipped screwdriver
or small metal plate (neither are
included in the tool kit) to remove
the cover. Carefully pry on the
edge of the cover.
To release the Reverse Lockout,
make sure the ignition switch is in
the ACCESSORY(I) position.
Make sure the ignition switch is in
the LOCK (0) position.
Set the Parking brake.
Insert a screwdriver in the Shift
Lock Release slot.
Push down on the screwdriver and
move the shift lever out of Park to
Neutral.
To release the Reverse Lockout,
move the shift lever from Neutral
to Reverse, then to Park.
Remove the Screwdriver from the
Shift Lock Release slot, then
install a new cover. Make sure the
notch on the cover is on the right
side. Depress the brake pedal and
restart the engine.
If you need to use the Shift Lock
Release, it means your vehicle is
developing a problem. Have the
vehicle checked by your Honda
dealer.
1.
2.
3.
4.
5.
6.
Shif t Lock Release
Automatic Transmission
Driving
209
S
S
H
H
I
I
F
F
T
T
L
L
O
O
C
C
K
K
R
R
E
E
L
L
E
E
A
A
S
S
E
E
S
S
L
L
O
O
T
T
C
C
O
O
V
V
E
E
R
R
Main Menu
Table of Contents