HONDA 2002 CR-V - Owner's Manual - Manual (Page 296)

Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Test the lights to make sure the
new bulb is working.
Put the socket back into the light
assembly and turn it clockwise to
lock it in place.
Put the cover back onto the light
assembly. Push it on until it locks
in place.
Open the tailgate. Remove the
light assembly cover by pushing in
on the tabs on both sides and
pulling the cover off.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
1.
2.
3.
4.
5.
6.
Replacing a High-mount Brake
Light Bulb
Lights
Maintenance 292
Main Menu Table of Contents