HONDA 2002 CR-V - Owner's Manual - Manual (Page 317)

CONTINUED
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully, it may be hot from
driving. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
You could scratch the wheel if you
put it face down. 18. 19. 20.
Changing a Flat Tire
Taking Care of the Unexpected 313
B B R R A A K K E E H H U U B B
Main Menu Table of Contents