Changing a flat tire – HONDA 2002 CR-V - Owner's Manual User Manual
Page 318
Advertising
Put the flat tire on the spare tire
holder. Put the wheel nuts on
finger-tight, then tighten them
with the wheel wrench.
Put the center spacer in the center
of the wheel.
Store the jack in its holder. Turn
the jack’s end bracket to lock it in
place. Install the cover on the side
of the cargo area.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Remove the center cap from the
flat tire.
Lower the vehicle to the ground
and remove the jack.
23.
21.
22.
24.
25.
Taking Care of the Unexpected
Changing a Flat Tire
314
C
C
E
E
N
N
T
T
E
E
R
R
S
S
P
P
A
A
C
C
E
E
R
R
80 lbf·ft (108 N·m , 11 kgf·m)
Main Menu
Table of Contents
Advertising