Keys and locks – HONDA 2002 CR-V - Owner's Manual User Manual

Page 91

Advertising
background image

You can insert or

remove the key only in this position.
To switch from ACCESSORY to
LOCK, you must push the key in
slightly as you turn it. If your vehicle
has an automatic transmission, the
shift lever must also be in Park. The
anti-theft lock will lock the steering
column when you remove the key.

If the front wheels are turned, the
anti-theft lock may sometimes make
it difficult to turn the key from
LOCK to ACCESSORY. Firmly turn
the steering wheel to the left or to
the right as you turn the key.

Use this position

only to start the engine. The switch
returns to ON (II) when you let go of
the key.

You will hear a reminder beeper if
you leave the key LOCK (0) or
ACCESSORY (I) position and open
the driver’s door. Remove the key to
turn off the beeper.

The engine will not start if the
Immobilizer System does not
recognize the key’s coding (see page

).

This is the normal key

position when driving. All features
and accessories on the vehicle are
usable. Several of the lights on the
instrument panel come on as a test
when you turn the ignition switch
from ACCESSORY to ON.

In this position,

you can operate the audio system
and the accessory power sockets.

85

Keys and Locks

Instruments and Controls

LOCK (0)

START (III)

ON (II)

ACCESSORY (I)

87

Removing the key from the

ignition switch while driving

locks the steering. This can

cause you to lose control.

Remove the key from the

ignition switch only when

parked.

Main Menu

Table of Contents

Advertising