HONDA 2000 Passport - Owner's Manual User Manual
Page 125
To store a frequency:
1. Select the desired band: A M ,
FM1, or FM2.
2. Use the TUNE or SEEK
function to find a desired
station.
3. Pick the preset button you
want for that station. Press the
button and hold it until you
hear a beep.
4. Repeat steps 1 to 3 to store a
total of six stations on AM and
twelve on FM.
Once a station's frequency is
stored, simply press and release
the proper preset button to tune to
it. The number of the preset
button you have selected is shown
in the display.
The preset frequencies will be lost
if your vehicle's battery goes dead
or is disconnected.
SCAN — The SCAN function
samples all the stations with
strong signals on the selected
band. To activate it, press the
SEEK/SCAN button until you hear
a beep, then release it. The system
will scan up the band for a station
with a strong signal. When it finds
one, it will stop and play that
station for approximately five
seconds. If you do nothing, the
system will then scan for the next
strong station and play that for
five seconds. When it plays a
station that you want to continue
listening to, press the
SEEK/SCAN button again.
Comfort and Convenience Features
ON/OFF/VOL KNOB
AM/FM1/FM2 BUTTON
DISPLAY
PRESET BUTTONS
TUNE BUTTON
SEEK/SCAN BUTTON
Main Menu
Table of Contents