HONDA 2000 Passport - Owner's Manual - Manual (Page 147)

Accelerating (While Cruise
Control System Is in Use)
Depress the accelerator pedal for
acceleration.
When you release the accelerator
pedal, the vehicle's speed w i l l
gradually return to the preset speed.
Resetting to Higher Cruising Speed
You can accelerate by turning and
holding the knob at the
"RESUME/ACCEL" position for
more than one second.
The cruise control system will be
reset to the speed you are
travelling when you release the
knob.
For a quick reset, accelerate with
the accelerator pedal to the
desired speed, then press and
release the "SET/COAST" button.
Decelerating (While Cruise
Control System Is in Use)
Press and hold the "SET/COAST"
button to decelerate. Release the
button when you reach the desired
speed; the cruise control system
w i l l be set to that speed. The
lowest speed to which the system
may be set is 25 mph (40 km/h).
When it is necessary to make a
quick reset, depress the brake
pedal. Press the "SET/COAST"
button when you reach the desired
speed.
The cruise control system cannot
be set to speeds below 25 mph (40
km/h).
Tap Up (While Cruise Control
System Is in Use)
Quickly turning and releasing the
knob at the "RESUME/ACCEL"
position with the cruise control
engaged allows you to "tap up"
the preset cruising speed. Each
turn increases the preset cruising
speed by one mile per hour (1.6
km/h). The preset cruising speed
can be increased by up to 10 miles
per hour (16 km/h) in this manner.
Comfort and Convenience Features
Main Menu Table of Contents