IC Realtime Max Series: 4/8/16 Channel D1 1.5U Standalone DVR User Manual
Page 167
157
For ATM/POS with the protocol, you just need to set the source IP, destination IP (sometimes
you need to input corresponding port number).
Figure 7-84
Without the protocol
For the ATM/POS without the protocol, the interface is shown as in Figure 7-85.
Source IP refers to host IP address that sends out information (usually it is the device host.)
Destination IP refers to other systems that receive information.
Usually you do not need to set source port and target port.
There are total four groups IP. The record channel applies to one group (optional) only.
Six frame ID groups verification can guarantee information validity and legal.
Figure 7-85
Click Data button you can set offset value, length, title according to your communication protocol
and data package. .