IC Realtime Flex Series: 32-CH High Performance H.264E 2U DVR - Manual (Page 54)

44
Figure 4-25
4.6.4 Camera Masking
When someone viciously masks the lens, or the output video is in one-color due to the
environments light change, the system can alert you to guarantee video continuity. Camera
masking interface is shown as in F igure 4-26.
Tips:
You can enable preset/tour/pattern activation operation when video loss occur s.
Please refer to chapter 4.6.2 motion detection for detailed infor mation.
Note:
In Detect interface, copy/paste function is only valid for the same type, which means you can
not copy a channel setup in video loss mode to camera masking mode.