IC Realtime Flex Series: 64 Channel 2CIF 3U Standalone DVR - Manual (Page 126)

116
Important
The window display mode and the channel number are by default. For example, for the 24-
channel, the max window split mode is 25 and for the 36-channel, the max window split
mode is 36.
3) Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one
channel, system switches to single channel and system uses main stream to monitor. You can
view there are two icon at the left top corner of the channel number for you reference. M stands
for main stream. A stands for
4) When you switch from Monitor to Search or Configuration, system pops a dialogue box asking
you leave current interface or not. See Figure 7-21.Click the OK button, system will close current
monitor window. For example, you click the Config button when you are monitoring, system pos
up a following dialogue. Click the OK button, system closes current monitor interface and open
the configuration interface. The monitor interface appears automatically after you close
configuration interface. When you switch from Search to the Configuration interface, system also
pops up the same dialogue box for your confirmation. Click OK button, you can see system close
playback interface and open the configuration interface. Please note, system will not open the
playback interface again after you close the configuration interface.
Figure 7-21
5) If you login via the WAN mode, system does not support alarm activation to open the video
function in the Alarm setup interface.
Important
z
For multiple-channel monitor mode, system adopts extra stream to monitor by default. You
can not modify manually. All channels are trying to synchronize. Please note the
synchronization effect still depends on your network environments.
z For bandwidth consideration, system can not support monitor and playback at the same time.
System auto closes monitor or playback interface when you are searching setup in the
configuration interface. It is to enhance search speed.
7.5 Configure
7.5.1 System Information
7.5.1.1 Version Information
Here you can view device hardware feature and software version information. See Figure 7-22.