IC Realtime 8/16/32 Channel 1.5U 8/16 PoE Network Video Recorder - Manual (Page 19)

11
3 HDD Installation
Important：
Please turn off the power before you replace the HDD.
The pictures listed below for reference only.
① Use the screwdriver to loose the screws of the rear panel and then remove the front cover.
② Put the HDD to the HDD bracket in the chassis and then line up the four screws to the four
holes in the HDD. Use the screwdriver to fix the screws firmly to secure HDD on the HDD
bracket
③ Connect to the HDD data cable to the main board and the HDD port respectively. Loosen the
power cable of the chassis and connect another end of the power cable to the HDD port.