IC Realtime 4/8/16/32 Channel 2U Network Video Recorder - Manual (Page 76)

67
6.6.10 Default
Click default icon, system pops up a dialogue box. You can highlight to restore default factory
setup.
z
Select all
z General
z Encode
z Schedule
z RS232
z Network
z Alarm
z Detect
z Pan/tilt/zoom
z Display
z Channel name
Please highlight icon to select the corresponding function.
After all the setups please click OK button, system goes back to the previous menu.
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!
6.6.11 Remote Device
6.6.11.1 UPNP
Please connect the IPC to the PoE port of the device rear panel (Figure 6-69), system can auto
connect to the IPC.