Interlogix NS2503-24P/2C User Manual - Manual (Page 172)

NS2503-24P/2C User Manual
172
SNMP
Any Network Management running the simple Network Management Protocol (SNMP) can be management the switch.
System Options
Snmp /no snmp
Description:
Enable or disable SNMP.
Show snmp status
Description:
Show the enable or disable status of SNMP.
snmp system-name
Description:
Set agent system name string.
Syntax:
snmp system-name <name-str>
Parameters:
<name-str> specifies the system name string.
e.g. snmp system-name SWITCH
snmp system-location
Description:
Set agent location string.
Syntax:
snmp system-location <location-str>
Parameters:
<location-str> specifies the location string.
e.g. snmp system-location office
snmp system-contact
Description:
Set agent system contact string.
Syntax:
snmp system-contact <contact-str>
Parameters:
<contact-str> specifies the contact string.
e.g. snmp system-contact [email protected]
show snmp system
Description:
Show SNMP system information.
Community Strings
snmp community
Description:
Set SNMP community string.
Syntax:
snmp community <read-sysinfo-only | read-all-only | read-write-all> <community-str>