Configure poe -- port, Poe enable – Interlogix NS2503-24P/2C User Manual User Manual
Page 185
Advertising

NS2503-24P/2C User Manual
185
Configure PoE -- Port
poe enable
Description:
Enabling or disabling the port POE injects function.
Command Level:
Global Configuration
Syntax:
poe enable
[<port-list>]
[no] poe enable
[<port-list>]
Parameters:
<port-list> specifies the ports to be set. If not entered, all ports are set.
Example:
Switch
(config)# poe enable 1
Switch(config)# show poe status 1
Port
Admin Oper
Power
mode
Priority Power Limit[W]
Current
Consumption [W]
Current[mA] Device Class
Port1
Enable
on
802.3at
Low
30.8
0
0
0
Switch(config)# no poe enable 1
Switch(config)# show poe status 1
Port
Admin Oper
Power
mode
Priority Power Limit[W]
Current
Consumption [W]
Current[mA] Device Class
Port1
Disable
on
802.3at
Low
30.8
0
0
0
Advertising