Interlogix NS2503-24P/2C User Manual - Manual (Page 85)

NS2503-24P/2C User Manual
85
Figure 4-5-3: Static Trunking Group Information Screenshot
The page includes the following fields:
Object Description
Group Key: This is a read-only column field that displays the trunk group ID.
Port Member:
This is a read-only column field that displays the members of this static trunk
group.
 LACP enabled
Having set up the aggregator setting with LACP enabled, you will see the trunking group information between two switches on
the tab of Aggregator Information.

Switch 1 configuration
1. Set System Priority of the trunk group. The default is 32768.
2. Select a trunk group ID by pull down the drop-down menu bar.
3. Enable LACP.
4. Include the member ports by clicking the Add button after selecting the port number and the column field of Work
Ports changes automatically.