Interlogix TVE-DEC10 - Manual (Page 16)

12 TVE-DEC10 IP Video Decoder User Manual
2. Select the channel to be decoded from the Decoding Channel drop-down
list.
3. Enter a dwell time in the Dwell Time box. This is the time in seconds that the
image is displayed before moving on to the next one.
4. Click Modify to define the channel parameters. In the window enter the
channel parameters:
Remote host IP address: Enter the IP address of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host port: Enter the port of the encoding device.
Remote host channel: Enter the channel number of the encoding device to
be decoded.
User ID/password: Enter the user name and password used to log into the
encoding device.
Transmission protocol: Select the protocol for data transmission, either
TCP or UDP
Stream type: Select the stream type to decode, either main stream or sub-
stream.
Note: Up to 64 cameras can be decoded in sequence.
5. Click Confirm to save the settings and return to the previous window .
Remote playback
Use this function to remotely access the encoder to stream and decode stored
files for local output. The encoder must have storage capabilities.
To set up remote playback:
1. Click Decoding Operation > Decode Mode > Remote playback. The
Remote Playback window appears.