Interlogix TVE-DEC10 - Manual (Page 6)

2 TVE-DEC10 IP Video Decoder User Manual
Product description
Figure 1: Front panel
LED indicator Description
PWR The power LED
LINK Network connection LED
RX/TX Data transmitting/receiving status LED
RESET Reset to factory default settings
VGA VGA decoding output
DVI DVI decoding output
HDMI HDMI decoding output
VIDEO OUT BNC decoding output
Figure 2: Back panel
Item Name Description
1. MIC In Microphone input.
2. Audio Out Connect to an audio output device. R is right channel, L is left
channel.
3. RS-232 Connect to an RS-232 device, such as a computer.
4. RS-485 Connect to RS-485 serial port.
5. Alarm Out Connect up to two alarm relay outputs.
Alarm In Connect up to four alarm relay inputs.
6. LAN Connect the 10M/100Mbps self-adaptive UTP Ethernet port to a
network.
7. 12 VDC Connect a 12 V power supply via a PSU.
8. GND Connect to ground.