Interlogix TVE-DEC10 - Manual (Page 25)

TVE-DEC10 IP Video Decoder User Manual 21
2. Check NTP Correction and enter the IP address of the NTP server and the
NTP port value. The default IP address is 192.168.1.70. The default NTP port
value is 123.
- Or -
Check Manual Connection and select the time zone that is closest to the
device’s location from the drop-down list.
3. Click Save to save the settings.
Basic network settings
You must configure your decoder
’s network settings before using it over the
network.
To configure basic settings:
1. Click the Configuration > Basic Network Settings . The Basic Network
Settings window appears.
2. Enter the required values for the following options:
Option Description
IP address Enter the IP address for the decoder.
The default IP address is 192.168.1.70.