Interlogix TruVision NVR 10 User Manual - Manual (Page 131)

Chapter 16: Using the web browser
TruVision NVR 10 User Manual 125
Remote configuration
See Table 19 below for an overview of the remote configuration menu functions. Please
refer to the specific sections on the OSD menu functions for more information on
configuring these functions.
Note: The configuration settings defined remotely are different from those that can be
defined locally.
Table 19: Description of remote configuration menus
Menu Function Description
Device
Parameters Device Information Device name: Define the NVR name. The default name
is TVN 10.
Device no.: The device number to use for the NVR when
programming the remote control. The default value is
255.
Time Settings Define time and date. See “Configuring time and date” on
page 80 for more information. See “NTP server” on page
48 for information on setting up NTP time settings.
Holiday Settings Define how recordings occur during holiday periods. See
“Holiday schedules” on page 29 for more information.
Camera Settings Display Settings Define which information is displayed on-screen. See
“Configuring the camera OSD settings” on page 65 for
more information.
Video Settings Define general recording settings. See “Configuring
recording schedules” on page 27 for more information.
Record Schedule Define the recording schedules. See “Configuring
recording schedules” on page 27 for more information.
Motion Detection Define motion detection parameters. See “Setting up
motion detection” on page 36 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Setting
up privacy masking” on page 66 for more information.
Tamper-proof Define the video tampering detection settings. See
“Detecting video tampering” on page 42 for more
information.
Video Loss Define the video loss detection settings. See “Detecting
video loss” on page 41 for more information.
Text Overlay Add extra lines of text on screen. See “Text overlay” on
page 129.
Covert Camera Define the cameras whose images cannot be displayed
by those not logged in. See “Hiding a camera image from
view” on page 68 for more information.
Capture Settings Define the image quality of snapshots.
Manual Record Define which cameras can manually record. See “Manual
recording” on page 30 for more information.